XM HP Headphone Amplifier

XM HP Headphone Amplifier

Category:

Small in size but big on musicality

Available in black or titanium finish the XM Series of components may be small in size but they’re big on features and performance. With unmatched levels of sound quality and clarity the XM Series conveys the art of music replay with outstanding realism.

  • Custom-made toroidal power transformer
  • High quality all aluminium casework and extruded front panel
  • High quality resistors & capacitors used in the signal path
  • All discrete audio output stage with high drive capability for low impedance headphones
  • 2 pairs of 6.35mm jacks and 2 pairs of XLR sockets, allowing 2 pairs of headphones to be used at one time
  • Moving magnet phono and two line level inputs
  • Two coax (bnc) and two optical inputs and one class 2 USB input with DSD
  • Separate pre-amp output
  • Remote control
  • Available in black or titanium

Headphone Output
Output Impedance : <5 Ohms
Maximum Level into 33 Ohms Load : @ 1kHz & 0.01% THD : 7V RMS (1.5W)
Total Harmonic Distortion : @ 2V output, 1kHz : <0.003% (120mW)
Maximum Level into 330 Ohms : @ 1kHz & 0.01% THD : 7.5V RMS (170mW)
Total Harmonic Distortion : @ 2V output, 1kHz : <0.003% (12mW)
Load Impedance Total All Outputs : 16 Ohms minimum

Analogue Inputs
AUX/PH Input MM : 2.5mV @ 1kHz, 47K Ohms S/N > 73dB
Frequency Response : +/-0.5dB 50Hz-20kHz. High pass roll off -1.5dB @ 20Hz
AUX 2 & AUX 3 Input Line : 350mV @ 1kHz > 14K Ohms output gain x3.75, +11.5dB
Total Harmonic Distortion : <0.005% at 1kHz : @ 1.3V RMS output
Frequency Response : 20Hz – 20kHz +/- 0.5dB
Signal to Noise Ratio : ref 1.3V RMS Output : 1kHz >92dB
Channel Separation @ 20kHz : >60dB

Digital Inputs
SPDIF Inputs BNC Coax & Optical : 32 – 192kHz @ 16-24 bits
Total Harmonic Distortion : <0.005% at 1kHz @ 1.3V RMS output
Signal to Noise Ratio : ref 1.3V RMS Output : 1kHz : >98dB
USB Input : Linear PCM 44K1 – 192kHz @ 16-24 bits, DSD x64 (DoP) Asynchronous transfer from host

General
Mains Supply : 110/120V or 220/240V @ 50/60Hz (factory set)
Fuse : T2AL for 110/120V units, T1AL for 220/240V units
Power Consumption : <15W
Dimensions (HxWxD) : 89mm x 218mm x 363mm
Net Weight : 4kg
Gross Weight : 5kg

→ Download product information sheet here