When Italian tube-and-solid-state aesthetics meet the Opera flagship|Unboxing at Ture Sound in Causeway Bay
Step into Yee Wo Street, Causeway Bay, where the clanging of trams and the bustle of crowds are part of daily life. Yet on the ground floor of Lok Sing Centre, behind a door, the pace suddenly slows down. Ture Sound, a long-established high-fidelity audio store rooted on Hong Kong Island, features subdued lighting inside. Its neatly lined-up equipment exudes the composed charm of a classic showroom. The stars of this unboxing session are all from Italy’s Unison Research and Opera Loudspeakers, imported exclusively by our company. They bring vacuum tube craftsmanship from Northern Italy and the acoustic aesthetics of opera houses straight into the busy streets of Causeway Bay.
No rush to play sound at the unboxing. As cartons and packaging materials are peeled away layer by layer, the first set of equipment revealed is the Unico series Pre v2 preamplifier and DM v2 power amplifier. This preamp-power amp combination stands as the flagship of the Unico line and represents the brand’s most thorough architectural overhaul in recent years. The Pre v2 is no longer reserved solely for analogue circuit enthusiasts. It integrates MM/MC phono stage amplification and DAC decoding (optical, coaxial, USB-B), greatly expanding its practicality. Its front panel adopts Unison’s new “Velvet Gold” finish, with an asymmetric chamfered aluminium faceplate that is understated and sleek. It bears no ostentatious brand logo, delivering a cool, solid tactile feel. Internally, it retains a hybrid tube-and-solid-state dual-mono architecture. Signal gain is mainly handled by Gold Lion ECC83/ECC82 tubes, while solid-state buffer stages reduce output impedance. Digital volume control covers a 95dB range in 0.5dB steps.
The DM v2 power amplifier is one of the heavyweights in this unboxing. Housed in a 33-kilogram chassis are two encapsulated 750VA toroidal transformers, with thoroughly isolated power supply. Its amplification core relies on A.S.H.A. technology, co-developed by Unison and the Department of Electronics at the University of Padua. This technology eliminates crossover distortion inherent to conventional push-pull amplification while preserving the warm tonal character of tube amplifiers and the driving force of high-power solid-state amplifiers. In stereo mode, the DM v2 delivers 220W per channel into 8Ω and 340W per channel into 4Ω. When bridged for mono operation, output surges to 650W into an 8Ω load, giving it ample power to drive most difficult floorstanding loudspeakers. In the Original Sound showroom, this preamp and power amp set sits beside the flagship speakers, fully wired and warmed up, ready for playback.
Next up is Unison Research’s latest Black Edition lineup: Simply Italy, Triode 25 and S6. The black piano-lacquered wooden panels and dark metal trim lend the three models a restrained air of luxury, yet the real upgrades lie deep within the circuitry. Across the entire Black Edition range, the output tubes have been upgraded from EL34 to Genalex Gold Lion KT77, and signal tubes use Gold Lion ECC83/ECC82. More importantly, the manufacturer has completely removed the traditional auto-bias circuit in favour of electronic bias management. It also implements CCL (Cathode Capacitor Less) technology on the output stage, removing cathode capacitors and resistors to achieve faster transient response and lower phase distortion. The three models form a clear tiered product lineup:
Simply Italy: 10W pure Class A, paired with one pair of ECC82 and one pair of KT77. It serves as the most accessible entry point into the world of Unison tube amplifiers.
Triode 25: Class AB, with four KT77 tubes in push-pull configuration. It can switch between triode mode (30W) and pentode mode (50W). The tonal and driving differences between these two modes are this model’s most captivating feature.
S6: 40W pure Class A (6Ω), roughly 15% higher power output than the standard version. It uses ECC83 tubes in the input stage and three KT77 tubes in the output stage. Its dual-mono design and SUB output make it the best suited of the three for driving medium-sized floorstanding speakers.
All three Black Edition models also feature built-in DAC decoding, with USB (PCM 384kHz / native DSD 256x), Toslink and SPDIF inputs. Digital users do not need an external decoder. For listening spaces in Hong Kong where every square foot is precious, this all-in-one integrated tube amplifier offers far greater practical value than raw specification figures.
Nevertheless, the true star of this unboxing is the Opera Loudspeakers Grand Callas Edizione Speciale. It carries flagship-scale dimensions: standing 130cm tall and weighing 75kg per unit. It uses a three-way rear-firing bass reflex design. The cabinet is constructed from MDF and solid wood veneer, with baffle thickness ranging from 25mm to 50mm, an internal volume of 92 litres, and a separately sealed midrange chamber lined with high-efficiency polyurethane acoustic foam. The driver array follows Opera’s signature flagship configuration: Scan-speak 9700 tweeter (without ferrofluid), one 7-inch polypropylene midrange driver and two 8-inch long-throw woofers. All drivers are custom-made for Opera by Scan-speak, equipped with aluminium cones, symmetrical magnetic circuits and stabilising rings. Although the woofers hand over to the midrange driver at 200Hz, their linear operating range extends all the way to 1500Hz, ensuring seamless handover around the crossover point.
The “Speciale” of Edizione Speciale reveals itself in fine details. While the standard Grand Callas features a glass top plate, this limited edition comes with a 5mm thick engraved aluminium top plate. The cabinet veneer is upgraded to rare Padouk wood, all internal wiring is replaced with AudioQuest cabling, and the binding posts are redesigned. These modifications are not merely for visual opulence; they target cabinet resonance and contact loss. Opera also implements a distinctive rear-radiating design on the Grand Callas: two additional 1-inch soft-dome tweeters are mounted on the back panel, radiating sound rearwards in a natural dipole arrangement. They do not directly interfere with the forward direct sound, yet they expand the depth and three-dimensionality of the soundstage. The crossover network employs Mundorf capacitors, MOX resistors and OFC copper inductors. Tweeter and mid-bass circuits use separate PCB layouts to reduce mutual inductance. It has an 89dB sensitivity rating, a frequency response of 32Hz–25kHz and a minimum impedance of 3.2Ω. The manufacturer states it can be driven from as little as 10W RMS. This explains why both the 10W Simply Italy and the 650W bridged DM v2 from Unison can pair harmoniously with this flagship speaker in the same demonstration system.
Upon leaving Ture Sound, the streets of Causeway Bay remain bustling with traffic. Yet what lingers in the mind is the wood grain of the Padouk flagship speakers under the lights, the gentle warm glow of the KT77 tubes once the Black Edition amplifiers are powered on, and the completeness of the Unico preamp-power amp set, which elevates Unison’s hybrid tube-and-solid-state philosophy to flagship status. For audiophiles, the arrival of these new models means that at this ground-floor shop on Yee Wo Street, listeners can experience the full spectrum of Unison Research tube amplifiers from 10W to 650W, alongside the sound of Italian opera houses crafted by Opera using Padouk wood and Scan-speak drivers. The unboxing is only the prologue; playback is where the story truly begins.
