[et_pb_section fb_built=”1″ _builder_version=”4.27.4″ _module_preset=”default” width=”77%” width_tablet=”100%” width_phone=”100%” width_last_edited=”on|desktop” max_width_tablet=”100%” max_width_phone=”100%” max_width_last_edited=”on|desktop” module_alignment=”left” global_colors_info=”{}”][et_pb_row _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][et_pb_gallery gallery_ids=”18506,18507,18508,18509,18510,18511,18512,18513,18514,18515,18516,18517,18518,18519,18520,18521,18522,18523,18524,18525″ posts_number=”3″ show_title_and_caption=”off” _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][\/et_pb_gallery][et_pb_heading title=”Summit meeting\u2026\uff5cVisiting the new team at Peak Consult” _builder_version=”4.27.4″ _module_preset=”default” title_font_size=”34px” global_colors_info=”{}”][\/et_pb_heading][\/et_pb_column][\/et_pb_row][et_pb_row _builder_version=”4.27.4″ _module_preset=”default” custom_margin=”0px||||false|false” custom_padding=”0px||0px||false|false” border_width_all=”1px” global_colors_info=”{}”][et_pb_column type=”4_4″ _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”][et_pb_accordion _builder_version=”4.27.4″ _module_preset=”default” toggle_font_size=”25px” width=”100%” max_width=”95%” module_alignment=”center” custom_margin=”|||0px|false|false” custom_padding=”|0px||22px|false|false” border_radii=”on|0px|0px|0px|0px” border_width_all=”0px” global_colors_info=”{%22gcid-36fd78a7-34bc-404d-873c-dafa34efaae5%22:%91%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22,%22quote_icon_color%22%93,%22gcid-primary-color%22:%91%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22,%22icon_color%22%93,%22gcid-heading-color%22:%91%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22,%22toggle_text_color%22%93,%22gcid-body-color%22:%91%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22,%22body_text_color%22%93}”][et_pb_accordion_item open=”on” _builder_version=”4.27.4″ _module_preset=”default” global_colors_info=”{}”]<\/p>\n
These days it seems that – whether you are a manufacturer or high-end customer – you are nobody unless your latest speaker is built into a curvaceous carbon-fibre monocoque, hewn from billet aluminium or proffers a set of acronyms for reconstituted wood fibre that reads like alphabet soup. Yet for every sumptuously sculpted Magico M7, there\u2019s a Clarisys – ghost of Apogees past mounting a new assault on the state-of-the-art: for every painfully stylish Estalon there\u2019s a reincarnated Tannoy dual-concentric, proudly proclaiming its heritage and DNA: for every V-version of a Wilson, there\u2019s Diptyque, nonchalantly making a step-change in planarmagnetic technology and sound quality. It\u2019s well to remember that, audio is a world in which \u2018new\u2019 cannot simply be translated as \u2018better\u2019 and we take as many (or more) steps sideways or backwards as we do forwards. There are many adages that apply to high-end hi-fi (including, with show season upon us, the ever popular, \u201cThe more expensive a system is, the worse it can sound!\u201d) but as both reviewer and listener, the one I find most useful is, \u201cIt ain\u2019t what you use, it\u2019s the way that you use it – that\u2019s what gets results…\u201d<\/p>\n
Like the examples cited above, incremental development of proven approaches often yields
results that are both more predictable and equal in performance to the revolutionary leaps in materials science we so often see cited in the ad copy and marketing materials. Recent experience with the Peak Consult Sinfonia, a speaker that can kindly be described as traditional in approach, less kindly as old-fashioned, is the perfect case in point. Outwardly almost wilfully
devoid of the latest, high-tech, high-fashion drivers and cabinet materials, it quietly turned in a musical performance that handily bettered the established benchmarks, benchmarks that shout louder and cost rather more. Score one for slow and steady, with \u2018gradual\u2019 being the order of the day. Of course, when it comes to incremental development, increments can vary, as can the rate of evolution…<\/p>\n
The Peak Consult story started 28 years ago, when an audiophile and carpenter by the name of Per Kristoffersen took one look at the chipboard cabinets of his beloved loudspeakers and felt confident he could produce something considerably better. It\u2019s not such a bad place to start. Before long he was making cabinets for friends and inevitably, started tinkering with his own designs – not without some significant commercial success. We refer to speaker systems for a reason and starting out by replacing just one part of the driver\/ crossover\/cabinet matrix left him with a healthy respectfor just how much contribution a cabinet makes, and which parts of it contribute most.<\/p>\n
Take a look at a Peak Consult speaker and it would be easy to assume that the carcass at least is formed from \u2018planks\u2019 of solid wood in a similar way to the early Sonus Faber designs. Nothing could be further from the reality. Fast forward through two decades of experimentation, trials involving not just different materials but different combinations of materials and the Peak \u2018recipe\u2019 had started to settle down to a well-defined approach, whose materials of choice are laminated 12mm HDF, clad in strips of solid hardwood, bonded into slabs. But the materials choice is only the starting point, with a whole range of different glues used to achieve different results at different points in the cabinet\u2019s structure.<\/p>\n
As an audio journalist, you get to visit many a speaker factory and, with very few exceptions, it\u2019s pretty much a case of seen one, seen \u2018em all. Sheet-fed CNC lines turn slabs of veneered MDF into \u2018fold-up\u2019 cabinets that are then stuffed with drivers. Walk into the Peak Consult facility and you immediately realise that you aren\u2019t in Kansas anymore – or B&W, KEF or Focal. Where you are is in a good old-fashioned wood-shop. A place where people use a range of human operated tools to cut, shape and bond wooden panels to be combined and then construct loudspeaker cabinets, no more than several at a time. This is a low-volume, handbuilt, artisan process – from beginning to end. It\u2019s a process that owes more to judgement and feel than it does to four-axis precision milling, high-speed routers and complex computer code. It\u2019s not entirely without its computer controlled elements, with cut-outs for drivers and reflex ports and rebates for terminal blocks all CNC machined, but the edge to edge construction is all a function of hand and eye. At heart, this is a furniture shop – as you can tell from the huge number of sash-clamps (large and small) hanging on every rack, so as to be ready to hand.<\/p>\n
Each cabinet starts out as a set of 12mm HDF panels that are first bonded together, normally using a visco-elastic adhesive (that is, one that doesn\u2019t set hard). Depending on the speaker model and the position of the panel within the cabinet, the laminated \u2018sandwich\u2019might consist of two, three or four layers of HDF, the thin, soft \u2018filling\u2019 creating a constrained layer construction that\u2019s stiff, heavy and yet capable of absorbing\/dissipating considerable energy. They can also be readily shaped or profiled into the complex facets and curves that you see minimising the diffraction effects from the front baffle of a Peak speaker. Once shaped and fitted, the panels are glued and clamped into three-dimensional boxes.<\/p>\n
The outer faces of each cabinet are now finished and prepared to receive their outer cladding, the hardwood layer that makes both an aesthetic and sonic contribution. Strips of Wenge or American Walnut, roughly 30mm wide, are bonded, edge to edge to create a broad \u2018plank\u2019 that, shaped and glued to the cabinet adds another stiffening, dispersive layer. This is no slap-dash procedure, with strips carefully selected and positioned or aligned to match the colour and grain of their neighbours, maintaining the natural beauty of the wood and avoiding unnatural shifts in shade or texture. It takes experience and a good eye, especially as the final result isn\u2019t necessarily obvious from the surface and can\u2019t be judged until the four coats of two different oils have been hand-applied to the finished panel.<\/p>\n
Before the hardwood skin can be attached, the front and rear baffles must be wrapped in a faux leather fabric, originally developed for the roofs of automobiles. It\u2019s tough, doesn\u2019t fade in the sun and it too adds a subtle damping effect to the baffles. With no grilles to hide the drivers, fitting and finishing around them, as well as the complex curves and angles of the baffle demand extreme care in order to avoid creases, wrinkles or undue stretching that might sag or loosen over time. It\u2019s exactly the same care and attention to detail that is visible in the selection of those wood strips and in the execution of the speakers\u2019 elegant outrigger bars and adjustable feet. But it extends well beyond fit and finish or simple aesthetics. The fact that the company supplies a torque driver with each speaker demonstrates just how serious they are about delivering not just consistently excellent standards of construction and surface finish, but consistent musical quality too. The audiophile tendency to tighten bolts as tight as possible – and then some – is neither the best policy nor the route to best performance. Driver fixings must be tightened evenly, avoiding distorting the basket\/face-plate, or introducing torsional stresses, any or all of which could result in resonant peaks within the driver\u2019s structure and thus, a direct impact on musical performance. Yet how many manufacturers supply a torque driver, or even publish torque settings for mounting their speaker drivers?<\/p>\n
Which brings us to Chapter Two of the Peak consult story. As I\u2019ve already pointed out, any speaker is a system. The best cabinet demands the best acoustic\/mechanical design to go with it, if it\u2019s going to deliver the best possible performance. Recent developments in speaker measurement have opened up a whole new tool box for both driver and system design – but a toolbox that, just like a box of chisels, needs practice and experience to use – practice and experience that was outside Per Kristoffersen\u2019s skill-set. It\u2019s no longer sufficient to simply match off-the-shelf drivers and components by ear. With that in mind, in 2021 he decided to sell the company, but new investors Wilfried Ehrenholz and Lennart Asbjorn Jensen were canny enough to recognise that this was a cabinet looking for up-to-the-minute driver and crossover design like a wedding dress is looking for a bride.<\/p>\n
The history of outside investors buying into audio companies hasn\u2019t always been either pretty or successful. In too many cases it has signalled the beginning of the end, but these are no ordinary investors. Wilfried Ehrenholz is the man who established and built the Dynaudio brand, before retiring to pursue a quieter life. In this case, that \u2018quiet\u2019 life incorporates a significant interest in Peak Consult and responsibility for on-going product development – the chance to apply his ideas and experience to performance orientated products without the price constraints that applied to so many Dynaudio projects.<\/p>\n
To that end, he has engaged the ser vices of audio design consultant extraordinaire, or speaker building gun-for-hire par excellence if you prefer, Karl-Heinz Fink (of Fink Team fame). KHF has been the go-to consultant for speaker companies the world over for quite some time – a role that has enab led him to accumulate possibly the most comprehensive suite of measuring\/listening facilities available, along with considerable experience in applying them. But most of those projects have been cost constrained, certainly speakers towards the lower end of the market. But irrespective of price, the fundamental approach is still going to be the same – as w e have seen from his own, Fink team designs. So for KHF too, the Peak Consult project was the opportunity to apply his talents and experience to products in which musical performance trumped cost considerations.<\/p>\n
Between the two of them, they specified new drivers from Audio Technology, working with the supplier to modify and optimise them to Peak\u2019s design requirements and purposes. They developed new crossovers to pair the electro-acoustic system with the enclosed volume and mechanical behaviour of the cabinets. They listened exhaustively to the whole cornucopia of audiophile crossover components, selecting on sound rather than price. Sometimes the most expensive option won out – and sometimes it didn\u2019t… Between them, along with Per Kristoffersen, they refined the existing El Diablo model while developing first, two completely new designs in the distinctively Peak shapes of the Sinfonia and slightly smaller, two-way Sonora, before turning their attention to the far more ambitious (and consider ably more impressive) Dragon Legacy, a five-driver, three-way, D\u2019Appolito design that at \u20ac185,000 and 225kgs each, weighs straight into one of the most hotly contested high-end market sectors there is.<\/p>\n
With the electrical elements and cabinets in place , you might consider that job done , but to do so is to ignore the third, equally important part of the equation. Lennart Asbj\u00f8rn is an audiophile, but he is not from within the audio industry. His background is in restaurants and large scale catering operations, a field in which the reliable and timely arrival of a whole host of different products through multiple supply chains demands some serious management capabilities – and that\u2019s before you get to the per sonalities involved! Reliable supply of consistent materials and components is essential to running a successful audio business and building its global reputation. Where highend companies could once rely on local sales, those days are gone, especially when your most affordable product starts at \u20ac25,000. The high-end market is genuinely global, even for a low-volume, specialist producer like Peak Consult. In fact, especially for a low-volume producer, a business model that creates its own challenges and pressures when it comes to customer confidence and product consistency. Creating a hand-built, artisan finished design is one thing: reliably supplying it as a product to customers around the world is quite another. It\u2019s a factor that is often overlooked and just as often underestimated when it comes to assessing the viability and longevity of any product and the company that makes it. In the case of Peak Consult, the Holy Trinity of the skills to build, the experience to refine and optimize and the diligence and business acumen to supply is well and truly embedded at the company\u2019s core.<\/p>\n
The Sinfonia has already redefined our expectations of the Peak Consult brand. The Dragon Legacy is currently busy ramming home the message and getting a shine. Both speakers respond to input, in terms of the driving system and the minutiae of set-up. That response culminates in a performance of beguiling musical coherence and expressive range. Seeing first hand the care and attention that gets lavished on every aspect of each Peak speaker, that end result comes as no surprise. The quality that makes music so fundamental to the human condition is its inherent humanity. Listening to (and working with) the Peak Consult speakers, it\u2019s impossible to ignore the human imprint writ large in their creation. There\u2019s a natural warmth and accessibility to their sound, a willingness, almost a desire to communicate. There are those who will find the Peak\u2019s appearance dated. They might even assume that their sound is dated too. But new isn\u2019t necessarily better. I suspect that more than a few listeners will find the Peak\u2019s fine finish and furniture quality construction as reassuring as their unforced musical integrity. For me, it\u2019s just nice to understand the \u2018why\u2019 that underpins a range of products that\u2019s as surprising as it is impressive.<\/p>\n
\n
[\/et_pb_accordion_item][\/et_pb_accordion][\/et_pb_column][\/et_pb_row][\/et_pb_section]<\/p>\n","protected":false},"excerpt":{"rendered":"
These days it seems that – whether you are a manufacturer or high-end customer – you are nobody unless your latest speaker is built into a curvaceous carbon-fibre monocoque, hewn from billet aluminium or proffers a set of acronyms for reconstituted wood fibre that reads like alphabet soup. Yet for every sumptuously sculpted Magico M7, […]<\/p>\n","protected":false},"author":2,"featured_media":18503,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"gallery","meta":{"_et_pb_use_builder":"on","_et_pb_old_content":"","_et_gb_content_width":"1920","footnotes":""},"categories":[337],"tags":[],"class_list":["post-18501","post","type-post","status-publish","format-gallery","has-post-thumbnail","hentry","category-blog-divi","post_format-post-format-gallery"],"yoast_head":"\n