The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and a aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.
Special Features
Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices.
SPECIFICATION
| Turntable section | |
| Drive System | Belt Drive |
| Motor | DC Motor |
| Speed | 33 1/3 RPM, 45 RPM |
| Rotation Speed Variation | +/–2% |
| Wow and Flutter | 0.2% |
| Signal-to-Noise Ratio |
67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF) |
| Platter | Aluminum Die-cast |
| Diameter of Platter | 12", 300mm |
| Tonearm section | |
| Armtube | Alumi tube |
| Type | Static Balance, Straight |
| Effective Arm Length | 8.8", 223.6mm |
| Stylus Pressure Range | 0 to 4g |
| Supported Cartridge Weight | 3.5 to 6.0g |
| Overhang | 18.6mm |
| Anti-skating Adjustment | Supported |
| Cartridge section | |
| Type | MM type (Audio-Technica AT3600) |
| Stylus Construction | Bonded Diamond |
| Frequency Response | 20Hz to 20kHz |
| Channel Separation | >18dB |
| Channel Balance | 2.5dB |
| Vertical Tracking Angle | 20 degrees |
| Supported Load Impedance | 47k ohms |
| Output Voltage | 2.5mV (1kHz, 3.54cm/sec.) |
| Stylus Pressure | 3.5g +/–0.5g |
| Cartridge Weight | 5g +/–0.5g |
| Head-shell Weight | 10g (including Screws, Nuts and Wires) |
| Analog Output | |
| Connector | RCA Pin jack (Gold-plated) |
| Power | AC 100 to 240V, 50/60Hz |
| Power Consumption | 1.5W (less than 0.5W at Standby) |
| Overall Dimensions (W x H x D) | 420 x 355 x 121 mm |
| Weight | Approx. 3.9 kg |
+852 9149 2164
1504191160
richcolninfo 
richcolninfo