CUBE and TOWER


 

 

CUBE and TOWER Absorber for cables  

Next to decoupling of HiFi components and load speakers we are experimenting since long time with damping of cables. So decoupling has been proved as particularly effective in area of load speaker and power cables. The reason for this improvement is obviously. According on electronic components cables does have the problem with microphonic too.

TOWER
Our TOWER absorber for cables has an corpus of the POM, which has very good damping behaviour.

On the buttom side is embedded a very soft foam of rubber, adjusted to the low weight of cables.

Depending on the hardness of the cable we recommend one absorber per 30 to 40cm cable length. The cable mst not touch the floor.

CUBE
For the absorber corpus we have chosen wood, because it has no electronic effect and additional it damps vibrations because of his airy and amorphous structure.

The selected wood called “Amasaque” comes from maritime regions in Africa. It has a high ratio of air and a relative uniform structure.

The surface of the wood we tread only with natural oil.

Depending on the hardness of the cable we recommend one absorber per 30 to 40cm cable length. The cable mst not touch the floor.