Power Cord


Shielded power cords should be a natural part in any high-quality hifi system. The RAMSES power cords are the ultimate solution for the mains supply of each component in high end audio systems.

The Technology

By its design the RAMSES PC1 power cord is in every respect driven to the maximum. Under constructive aspects, more is not possible. Every single conductor, made of copper Litz, has a maximum cross-section and is coated with a special ferrite-paste, resulting in a very effective interference suppression. The shield, made of a special metal mesh, together with the completely enclosing aluminium foil, is a very effective and extremely low-impedance protection.

The main technical data are :

cross section of the conductors 3 x 6.0 mm2

cross section of the shield 10 mm2

The RAMSES PC2 power cord is the less expensive version of the RAMSES power cords and is characterized by an excellent price-performance ratio. Every single conductor, made of copper Litz has a quite large crosssection and is also coated with a special ferrite-paste, resulting in a very effective interference suppression. The shield is made of a special aluminium-polyester tape, resulting in a very effective low-impedance protection.

The main technical data are :

cross section of the conductors 3 x 2.5 mm2

cross section of the shield 10 mm2

The Sound

The principal sound characteristics in a system by using the RAMSES power cords are their absolute homogeneity and neutrality, the entirely lack of any compensation effects as well as the exceptional speed and responsiveness of sound playback.

We are absolutely convinced that you will find no other power cord which gives you a more natural and a more homogeneous sound in a really neutral hifi system than the RAMSES power cords.

The Application

The RAMSES PC1 power cord is as standard available in any desired length from 1.50 to 5.00 meter. Other lengths are available on request.

The RAMSES PC2 power cord is as standard available in any desired length from 1.00 to 5.00 meter. Other lengths are available on request.

The RAMSES power cords are available with German or US wall plug at the input and standard IEC female plug at the output. Other plug configurations are available on request.

Like any other power cord RAMSES needs a certain runin time, however significantly lower than for other cable designs. After 2-3 weeks the music reproduction will achieve its absolutely perfect level.